| Product Introduction | This is a low-density two-component polyurethane foaming material. It mainly consists of Side A (polyether polyol base material containing auxiliaries such as catalysts and blowing agents) and Side B (polymeric MDI). After the two components are mixed in proportion, they foam and cure rapidly to form a lightweight material filled with fine cellular structures. Its density is far lower than conventional rigid foams, and it is primarily applied in lightweight scenarios for cushioning, thermal insulation and filling. |
| Product Advantages | 1. Low Density & Lightweight: Density ranges from 17–19kg/m³.
Porous structure delivers broadband sound absorption (100–5000Hz) and vibration damping to reduce road noise, wind noise and structural vibration.
Low thermal conductivity; suitable for automotive hood filling applications.
Formulation achievable to UL94 V-0 rating; excellent impact energy-absorbing performance to improve crash safety.
Automotive-grade formulation with low odor and low emission, meeting interior environmental requirements.
Supports pouring, molding and continuous mass production. |
| Performance Parameters | 1. Density: 15–18kg/m³ 2. Compressive strength: 100–130kPa 3. Operating temperature: –30℃ ~ +60 ℃ 4. Thermal conductivity: ≤0.040 W/(m•K) 5. Mixing ratio of Side A : Side B: 1:1.2–1.8 (common formulation, adjustable upon request) 6. Cream time, fiber time, gel time: 25–100s. Fast forming, compatible with manual / mechanical foaming. |
Product Categories
